For semi-automatic packing of pellets you will need:

• Pellets (fuel pellets).
• Finished polyethylene bags.
• A dispenser that can dispense doses of the required size into ready-made packaging (in this case, bags) and at the same time fully work with pellets (do not crush them, do not clog, do not create large deviations in doses). Pellets can be loaded into the hopper of the dispenser manually or the dispenser can be equipped with ZT-1 loading bucket transporter.
• Welder, which can be used to seal a bag filled with pellets.

Accordingly, the set of equipment will be as follows:

1. Weighing doser with belt feeder VLD-1 or Weighing doser with vibrating feeder VDV-8 (depending on performance)
2. ZGI-500-700 floor horizontal pulse heating welder. Regardless of the set of equipment, the operator will in any case need to fill the hopper of the dispenser with pellets (manually or with the help of a loading conveyor), place the ready bags on the dispenser, give the command to issue a dose, move the filled bags to the welder and weld them.< / li >