For automatic packaging of corn sticks, you need:

Actually, the corn sticks themselves. Polymer film in rolls. It is possible both with polygraphy and without it. In the presence of polygraphy, the drawing must be applied in such a way that its appearance does not change during the formation of the package (calculated for the dimensions of the package and the place where the seams are formed). The film can be of any type and any thickness, provided that its top layer is not polyethylene.

A packaging machine of increased sizes, which will simultaneously produce the formation of a package from a roll of film, will dispense a set dose of chips into such a package and seal (close) the package. Given that, as a rule, packing machines have a considerable height, it may make sense to equip the machine with a ZT-1 loading bucket conveyor (although no one excludes the possibility of manual loading).

Packaging machines that can cope with packaging chips in a "pillow" package are:

1. Pneumatic filling machine with weighing dispenser AF-35-V (increased sizes with two-level dispenser)
2. Pneumomechanical packaging machine with weight dispenser AF-50-V (increased two-level dispenser)

The difference between the proposed machines will be only in the type of packaging component. You can learn more about this by ordering a consultation from our specialist.

It is also desirable to provide for the possibility of removing ready-made packages from the machine. Otherwise, falling on the floor or on each other, they can damage the sticks packed in them. As an option, you can use the conveyor OT-1